E5 A12 -0mm Front Plate

Description

Replacement to the Eclipse5 front plate allowing you to run the Awesomatix A12 front end.

The -0mm Front plate Used with the AT1204-S Axles will retain a stock E5 wheelbase. 

Using the -0mm Front plate with AT1204-ZT-S (On Center) Axles will give you a wheelbase 3mm shorter then Kit E5 

You will need 2 standoff mounts for the new front brace. We recommend the A12 ones (AT1206) but you can use anything roughly 8-10mm in length. 

Comes with:

• 1x 2.5mm Carbon Fiber Front Plate
• 1x 2.0mm Carbon Fiber Front Brace

Parts needed to complete the A12 front end: 

• 2x A12-AT1204-S (or) A12-AT1204-ZT-S
• 1x A12-ST1208 (2* Caster)
• 1x A12-ST1208-C5 (5* Caster)
• 2x A12-AT1201
• 2x A12-DT1202
• 1x A12-OR155SI
• 1x A12-AT1206 (these are the front upper brace mounts)